A novel subcritical water synergistic co-treatment of brominated epoxy resin and copper-based spent catalysts: debromination, phenol production, and copper recovery.

In this study, a high-efficiency co-treatment strategy for brominated epoxy resin (BER) and copper-based spent catalyst (CBSC) was developed by using subcritical water (SubCW) process. Multivalent species of copper released from CBSC could accelerate the electron transfer of the SubCW system and efficiently catalyze radical reactions to promote the debromination and decomposition of BER, and had an effect on the capture and binding of bromine species. Meanwhile, the formation of HBr by the BER debromination resulted in a decrease in the system pH and markedly enhanced the leaching/recovery of Cu from CBSC. The optimal conditions of the SubCW co-treatment process were as follows: reaction temperature of 350 °C, solid-to-liquid ratio of 1:30 g/mL, BER-to-CBSC mass ratio of 10:1 g/g, and reaction time of 60 min. Under the optimal conditions, 97.12 % of the Br could be removed from BER by the SubCW co-treatment process and a high-purity phenol (64.09 %) could be obtained in the oil phase product, and 86.44 % of Cu in the CBSC could be leached and recovered. The introduction of CBSC significantly changed the decomposition path of BER. Compared to the SubCW process without CBSC, bromine-free oils products could be obtained by the co-treatment process of BER and CBSC at low-temperature. This study provided a novel understanding of resource conversion mechanism of BER and CBSC in subcritical water medium via the synergistic effect between the two different waste streams to improve treatment efficiency and synchronously recover high-value products.

Enhancing Debromination Efficiency through Introducing Water Vapor Atmosphere to Overcome Limitations of Conventional Pyrolysis.

Bromine removal is significant in the recycling of waste printed circuit boards (WPCBs). This study found that the critical factors limiting the debromination efficiency of conventional pyrolysis are the formation of coke impeding mass transfer and conversion of bromine into less volatile species, such as coking-Br and copper bromide. According to frontier molecular orbital analysis and thermodynamic equilibrium analysis, C-O bonds of resin are sites prone to electrophilic reactions and copper bromide in residue may undergo hydrolysis; therefore, introducing H2O during pyrolysis was a feasible method for thorough debromination. Through pyrolysis in a water vapor atmosphere, the diffusion limitation of debromination was overcome, and resin was converted into light components; thereby, rapid and deep removal of bromine was achieved. The result indicated that 99.7% of bromine was removed, and the residue could be used as a clean secondary resource. According to life-cycle assessment, pyrolysis of WPCBs in water vapor could be expected to reduce 77 Kt of CO2 emission and increase financial benefits by 60 million dollars, annually.

Evolution of the Bromate Electrolyte Composition in the Course of Its Electroreduction inside a Membrane-Electrode Assembly with a Proton-Exchange Membrane.

The passage of cathodic current through the acidized aqueous bromate solution (catholyte) leads to a negative shift of the average oxidation degree of Br atoms. It means a distribution of Br-containing species in various oxidation states between -1 and +5, which are mutually transformed via numerous protonation/deprotonation, chemical, and redox/electrochemical steps. This process is also accompanied by the change in the proton (H+) concentration, both due to the participation of H+ ions in these steps and due to the H+ flux through the cation-exchange membrane separating the cathodic and anodic compartments. Variations of the composition of the catholyte concentrations of all these components has been analyzed for various initial concentrations of sulfuric acid, cA0 (0.015-0.3 M), and two values of the total concentrations of Br atoms inside the system, ctot (0.1 or 1.0 M of Br atoms), as functions of the average Br-atom oxidation degree, x, under the condition of the thermodynamic equilibrium of the above transformations. It is shown that during the exhaustion of the redox capacity of the catholyte (x pass from 5 to -1), the pH value passes through a maximum. Its height and the corresponding average oxidation state of bromine atoms depend on the initial bromate/acid ratio. The constructed algorithm can be used to select the initial acid content in the bromate catholyte, which is optimal from the point of view of preventing the formation of liquid bromine at the maximum content of electroactive compounds.

Ipso Substitution of Aromatic Bromine in Chlorinated Waters: Impacts on Trihalomethane Formation.

Parabens and salicylates were examined as disinfection byproduct (DBP) precursors to explore the possible influence of ipso substitution (i.e., halogen exchange) on the yield and speciation of trihalomethanes (THMs) formed during water chlorination. Substoichiometric conversion of C-Br bonds into C-Cl bonds was confirmed for several parabens and salicylates. The co-occurrence of (mono)brominated and nonhalogenated precursors in the presence of free chlorine (but in the absence of added Br-) generated polybrominated THMs, implicating ipso substitution. The THM molar yield, bromine incorporation, and bromine recovery from brominated and nonhalogenated precursor mixtures were commensurate with those observed from equimolar additions of NaBr, indicating efficient displacement of aromatic bromine by free chlorine followed by reincorporation of liberated HOBr into DBP precursors. The THM molar yield from brominated precursors was enhanced by a factor of ≤20 relative to that from nonhalogenated precursors. Trends in THM molar yields and bromine incorporation differed between brominated parabens and brominated salicylates, suggesting that the influence of ipso substitution on THM formation varies with the structure of the organic precursor. Collectively, these results provide new evidence of the often-overlooked role ipso substitution can play in promoting halogen exchange and bromine enrichment among DBPs in chlorinated waters.

Degradation kinetics and formation of regulated and emerging disinfection by-products during chlorination of two expectorants ambroxol and bromhexine.

Ambroxol hydrochloride (AMB) and bromhexine hydrochloride (BRO) are classic expectorants and bronchosecretolytic pharmaceuticals. In 2022, both AMB and BRO were recommended by medical emergency department of China to alleviate cough and expectoration for symptoms caused by COVID-19. The reaction characteristics and mechanism of AMB/BRO with chlorine disinfectant in the disinfection process were investigated in this study. The reaction of chlorine with AMB/BRO were well described by a second-order kinetics model, first-order in both AMB/BRO and chlorine. The second order rate reaction constant of AMB and BRO with chlorine at pH 7.0 were 1.15 × 102 M-1s-1 and 2.03 × 102 M-1s-1, respectively. During chlorination, a new class of aromatic nitrogenous disinfection by-products (DBPs) including 2-chloro-4, 6-dibromoaniline and 2, 4, 6-tribromoaniline were identified as the intermediate aromatic DBPs by gas chromatography-mass spectrometry. The effect of chlorine dosage, pH, and contact time on the formation of 2-chloro-4, 6-dibromoaniline and 2, 4, 6-tribromoaniline were evaluated. In addition, it was found that bromine in AMB/BRO were vital bromine source to greatly promote the formation of classic brominated DBPs, with the highest Br-THMs yields of 23.8% and 37.8%, respectively. This study inspired that bromine in brominated organic compounds may be an important bromine source of brominated DBPs.

Proliferation toxicity and mechanism of novel mixed bromine/chlorine transformation products of tetrabromobisphenol A on human embryonic stem cell.

Mixed bromine/chlorine transformation products of tetrabromobisphenol A (ClyBrxBPAs) are mixed halogenated-type compounds recently identified in electronic waste dismantling sites. There are a lack of toxicity data on these compounds. To study their development toxicity, the proliferation toxicity was investigated using human embryonic stem cells (hESC) exposed to the lowest effective dose of two ClyBrxBPA analogues (2-chloro-2',6-dibromobisphenol A and 2,2'-dichloro-6-monobromobisphenol A). For comparison, tetrabromobisphenol A, 2,2',6-tribromobisphenol A, and bisphenol A were also assessed. It was observed that ClyBrxBPAs inhibited hESCs proliferation in a concentration-dependent manner. The cell bioaccumulation efficiency of ClyBrxBPAs was higher than that of tetrabromobisphenol A. Also, ClyBrxBPAs were more toxic than tetrabromobisphenol A, with 2,2'-dichloro-6-monobromobisphenol A exhibiting the most potent toxicity. Furthermore, flow cytometry and oxidative stress results showed that increased reactive oxygen species raised the degree of apoptosis and reduced DNA synthesis. Metabolomics analysis on the effect of ClyBrxBPAs on metabolic pathway alteration showed that ClyBrxBPAs mainly interfered with four metabolic pathways related to amino acid metabolism and biosynthesis. These results provide an initial perspective on the proliferation toxicity of ClyBrxBPAs, indicating development toxicity in children.

Structural, Theoretical Analysis, and Molecular Docking of Two Benzamide Isomers. Halogen Bonding and Its Role in the Diverse Ways of Coupling with Protein Residues.

The crystal structures of two methoxyphenylbenzamide isomers are described, (Ph2Br) and (Ph3Br), with the general formula C14H12BrNO2. This structural study revealed the presence of N-H-O and C-H-O hydrogen bonds, Br-Br halogen bonds, C-H-π, and C-Br-π molecular contacts, showing in both compounds, a central C1-C7(O1)-N1(H1)-C8 amide segment, to be almost linear. The close proximity between the Br1 and O1 in Ph2Br showed that its interatomic distance was less than the sum of their VDW radii, generating an increase in the electrostatic potential in the O1 region, making possible the appearance of the so-called σ and π-holes on bromine. These specific conditions give rise to the formation of the Br-Br halogens bonds, which are united in a very interesting way, allowing the bond to extend by joining halogen atoms between different molecules forming an isosceles triangle with Br-Br distances equal to 3.5403(4) Å and 5.085 Å as its base. The presence of the carbonyl group in Ph2Br, an excellent acceptor of hydrogen and halogen bonds, led to competition between these bonds to organize crystal growth. The analysis of the compounds as pharmacophores showed that the bromine atom plays a key role in interactions with protein residues, reaching good ligand-protein interaction values comparable to the values presented by the parent inhibitor, Asciminib. In contact with the ALA356 residue, the bromine of Ph2Br participates with a higher contact geometry using the σ-hole, whereas the bromine of Ph3Br employs a more efficient contact geometry by taking advantage of its π-hole.

(±)-Polysiphenol and Other Analogues via Symmetrical Intermolecular Dimerizations: A Synthetic, Spectroscopic, Structural, and Computational Study.

We report an improved total synthesis of 4,5-dibromo-9,10-dihydrophenanthrene-2,3,6,7-tetraol, (±)-polysiphenol, via intermolecular McMurray dimerization of 5-bromovanillin and subsequent intramolecular oxidative coupling as the key steps. The synthetic route is applicable to 4,5-dichloro- and 4,5-difluoro-halologues (as well as a 4,5-dialkyl-analogue). Distinctive AA'BB' multiplets in their 1H NMR spectra for the dimethylene bridges of the dibromo and dichloro compounds reveal them to be room-temperature stable atropisomers, while for the difluoro compound they present as a singlet. X-ray crystal structure determinations of their tetramethylated synthetic precursors show atropisomeric twist angles of 48°, 46°, and 32°, respectively, with the former representing the largest yet observed in any 4,5-disubstituted-9,10-dihydrophenanthrene. DFT computational studies reveal an unprecedented two-stage atropisomeric interconversion process involving time-independent asynchronous rotations of the dimethylene bridge and the biaryl axis for halologues containing chlorine or bromine, but a more synchronous rotation for the difluoro analogue.

Aquatic photolysis of the pharmaceutical ambroxol: The role of 2,4-dibromoaniline chromophore and heavy atom effect of bromine.

As one of the most effective expectorant class drugs, ambroxol (AMB) has been frequently used to treat acute and chronic bronchitis. Extensive use and human excretion result in the widespread occurrence of AMB in wastewater. Herein, we reported the photolysis of AMB in aqueous solution upon 254 nm ultraviolet radiation (UV254). Spectroscopic characterization showed that 2,4-dibromoaniline (DBA) moiety is the core chromophore of AMB. Quantum yield of DBA changed little at pH 4.0 - 9.0; however, AMB showed higher quantum yield at pH > 8.0. Both DBA and AMB have high photoreactivity, which can be attributed to the "heavy atom" effect of bromine substituents. The photolysis of AMB occurred through photoreduction, photoionization, photonucleophilic substitution, side-chain cleavage, and coupling reactions. Both AMB and DBA underwent debromination with yields reaching 80% under 3200 mJ cm-2 UV fluence. Photo-debromination occurred preferentially at the para-position. The presence of natural organic matter inhibited the photodegradation, mainly due to the light-screening effect. The photolysis of AMB was slightly enhanced in the presence of NO3- likely due to radical-induced oxidation. Bioluminescence inhibition assay revealed that photoproducts were not toxic. The results show that UV254 radiation with fluences relevant to advanced oxidation processes was effective for the abatement of AMB in wastewater. However, UV254 treatment of wastewater containing higher concentrations (˃ µg L-1) of AMB should be done with caution because the released Br- can be converted to toxic brominated disinfection byproducts and bromate in subsequent oxidation process.

Kinetic modelling of the bromine-ammonia system: Formation and decomposition of bromamines.

Bromamines i.e. monobromamine (NH2Br), dibromamine (NHBr2), and tribromamine (NBr3) can be formed during oxidative treatment of waters containing bromide and ammonia. The formation and decomposition of bromamines in aqueous solution was investigated and a comprehensive kinetic model of the bromine-ammonia system was developed at 23 ± 1 °C. Determination of rate constants and model validation were primarily performed at pH 8.0 - 8.3 for subsequent application to seawater disinfection. The rate constant of NHBr2 self-decomposition was determined by second-order rate law linearization with k9 = 5.5 (± 0.8) M-1s-1 at pH 8.10. The rate constant of NBr3 self-decomposition increased proportionately to the concentration of hydroxide ions (OH-) according to the equation k10 = 4.4 (± 0.1) × 107. [OH-] over the pH range 6.0 - 8.5, which gave k10 = 56 (± 1) M-1s-1 at pH 8.10. The rate constants of NHBr2 and NBr3 formation were obtained by fitting model-predicted data to the experimental results and were found to be k3 = 2.3 (± 0.2) × 104M-1s-1 and k5 = 4.0 (± 0.6) × 103M-1s-1, respectively at pH 8.10. NBr3 was also found to react with NHBr2 with k11 = 3.4 (± 0.2) × 103M-1s-1 at pH 8.10. A kinetic model was proposed based on these experimental rate constants and literature values, which provided a good prediction of bromamines formation and decomposition for various initial bromine and ammonia concentrations. The kinetic model was also used to accurately predict the total oxidant concentration and the speciation of bromamines during breakpoint bromination. This study provides kinetic data to model more complex oxidative systems such as seawater chlorination in the presence of ammonia.

Unintentional formation of mixed chloro-bromo diphenyl ethers (PBCDEs), dibenzo-p-dioxins and dibenzofurans (PBCDD/Fs) from pyrolysis of polybrominated diphenyl ethers (PBDEs).

This study presents the comprehensive investigation for formation pathways of chloro-bromo-mixed products from the pyrolysis of polybrominated diphenyl ethers (PBDEs). In the study, a total of 23 PBDEs with bromination levels from mono-to deca-were selected. Each PBDE standard was sealed in the glass vial and then heated under 450 °C in the muffle furnace to simulate the pyrolysis process. The results demonstrated that PBDEs in the glass vials can unintentionally transform into chloro-bromo diphenyl ethers (PBCDEs) and dibenzo-p-dioxin and dibenzofurans (PBCDD/Fs) during the pyrolysis process. Atmosphere pressure gas chromatography (APGC) coupled with high-resolution mass spectrometry (HRMS) was used to identify these pyrolysis products, which demonstrated that all investigated nPBDEs (n represents the number of bromine substituents) can unintentionally transform into Cl1-(n-1)BDEs, Cl2-(n-2)BDEs, Cl1-(n-1)BDFs, and Cl1-(n-3)BDDs, while some nPBDEs can transform into Cl1-(n-2)PBDD/Fs during pyrolysis. Experimental phenomena assisted with density functional theory (DFT) calculations reveal that Cl atom can substitute at C-Br rather than C-H, and Cl1-(n-1)BDEs can be easily generated by Cl atom attacking at C-Br sites with low energy barriers (3.66-11.9 kcal/mol). In addition, nPBDEs with lower bromination levels are more favorable to generate Cl1-(n-1)BDEs than those with higher bromination levels. Further DFT calculations suggest that PBDEs are preferentially first transformed into Cl1-(n-1)BDEs, then subsequentially transform into PBCDD/Fs. We believe the results of this study can greatly improve our understanding of the transformation mechanism from PBDEs to cholo-bromo-mixed products in thermal treatment processes and provide new insight into controlling the emission of toxic cholo-bromo-mixed products.

Pollution-Derived Br2 Boosts Oxidation Power of the Coastal Atmosphere.

The bromine atom (Br•) has been known to destroy ozone (O3) and accelerate the deposition of toxic mercury (Hg). However, its abundance and sources outside the polar regions are not well-known. Here, we report significant levels of molecular bromine (Br2)─a producer of Br•─observed at a coastal site in Hong Kong, with an average noontime mixing ratio of 5 ppt. Given the short lifetime of Br2 (∼1 min at noon), this finding reveals a large Br2 daytime source. On the basis of laboratory and field evidence, we show that the observed daytime Br2 is generated by the photodissociation of particulate nitrate (NO3-) and that the reactive uptake of dinitrogen pentoxide (N2O5) on aerosols is an important nighttime source. Model-calculated Br• concentrations are comparable with that of the OH radical─the primary oxidant in the troposphere, accounting for 24% of the oxidation of isoprene, a 13% increase in net O3 production, and a nearly 10-fold increase in the production rate of toxic HgII. Our findings reveal that reactive bromines play a larger role in the atmospheric chemistry and air quality of polluted coastal and maritime areas than previously thought. Our results also suggest that tightening the control of emissions of two conventional pollutants (NOx and SO2)─thereby decreasing the levels of nitrate and aerosol acidity─would alleviate halogen radical production and its adverse impact on air quality.

On the Dynamics of the Carbon-Bromine Bond Dissociation in the 1-Bromo-2-Methylnaphthalene Radical Anion.

This paper studies the mechanism of electrochemically induced carbon-bromine dissociation in 1-Br-2-methylnaphalene in the reduction regime. In particular, the bond dissociation of the relevant radical anion is disassembled at a molecular level, exploiting quantum mechanical calculations including steady-state, equilibrium and dissociation dynamics via dynamic reaction coordinate (DRC) calculations. DRC is a molecular-dynamic-based calculation relying on an ab initio potential surface. This is to achieve a detailed picture of the dissociation process in an elementary molecular detail. From a thermodynamic point of view, all the reaction paths examined are energetically feasible. The obtained results suggest that the carbon halogen bond dissociates following the first electron uptake follow a stepwise mechanism. Indeed, the formation of the bromide anion and an organic radical occurs. The latter reacts to form a binaphthalene intrinsically chiral dimer. This paper is respectfully dedicated to Professors Anny Jutand and Christian Amatore for their outstanding contribution in the field of electrochemical catalysis and electrosynthesis.

Enhanced Reactivity for Aromatic Bromination via Halogen Bonding with Lactic Acid Derivatives.

We report a new method for regioselective aromatic bromination using lactic acid derivatives as halogen bond acceptors with N-bromosuccinimide (NBS). Several structural analogues of lactic acid affect the efficiency of aromatic brominations, presumably via Lewis acid/base halogen-bonding interactions. Rate comparisons of aromatic brominations demonstrate the reactivity enhancement available via catalytic additives capable of halogen bonding. Computational results demonstrate that Lewis basic additives interact with NBS to increase the electropositive character of bromine prior to electrophilic transfer. An optimized procedure using catalytic mandelic acid under aqueous conditions at room temperature was developed to promote aromatic bromination on a variety of arene substrates with complete regioselectivity.

Impact of abiotic and biogeochemical processes on halogen concentrations (Cl, Br, F, I) in mineral soil along a climatic gradient.

In contrast to earlier ideas that halogens behave inertly in soil, extensive biogeochemical cycling of fluorine (F), chlorine (Cl), bromine (Br) and iodine (I) has been shown for temperate forests. To further advance our understanding of halogen behaviour in soil beyond humid temperate forests, we sampled soil profiles in protected areas along the Chilean Coastal Cordillera, representing a pronounced climatic gradient spanning from arid to humid. Halogen concentrations in soil were analysed by combustion ion chromatography. Highest average total halogen concentrations occurred at the arid site (Cl, F: 4270 and 897 mg kg-1) as well as the humid end of the climatic gradient (Br, I: 42.6 and 9.8 mg kg-1). Vertical distribution patterns of halogens were most pronounced at the humid end of the gradient and became less distinct under drier climate. The climatic gradient demonstrates the important role of biotic processes (e.g. the halogenation of organic matter) on the retention of halogens in the soil. However, this climate-specific role may be overridden by mainly abiotic processes within a given climate zone (e.g. weathering, leaching, sorption to secondary soil minerals, evaporative enrichment), resulting in vertical relocation of halogens in the soil. Since some of these processes oppose each other, complex interactions and depth distributions of F, Cl, Br and I occur in the soil. In summary, our findings provide new insights into the fate of halogens in mineral soil of different climatic zones, which is important, for example, when radiohalogens are deposited on a large scale after nuclear accidents.

Bromine K-Edge X-Ray Absorption Near-Edge Structure Analysis on Hydrobromide-Salt Crystals and the Solid Dispersion of Active Pharmaceutical Ingredients.

Bromine K-edge X-ray absorption near-edge structure (XANES) spectroscopy analyses were used to evaluate the crystals of the active pharmaceutical ingredients, eletriptan hydrobromide, dextromethorphan hydrobromide and scopolamine hydrobromide salts and the solid dispersion of eletriptan hydrobromide. The crystals and the solid dispersion of the active pharmaceutical ingredient (API) salts could be discriminated based on the shape of the XANES spectra. The differences in the shape of XANES spectra was ascribable to the differences in the interatomic interactions of the bromine ions based on the crystal structures. Ratio of the eletriptan hydrobromide α-form crystal in mixed powders of α-form and monohydrate crystals could be quantified by the linear-combination fitting using their XANES spectra. These results indicated that the XANES spectroscopy are a potent method for evaluating the APIs of pharmaceutical formulations even at the higher energy region around the bromine K-edge of 13470 eV.

Bromination mechanisms of aromatic pollutants: formation of Br2 and bromine transfer from metallic oxybromides.

Bromination mechanisms of aromatic pollutants assume a chief contribution in the observed yields and pattern's distribution of a wide array of dioxin-like toxicants. However, salient features of the governing pathways remain largely speculative. This study presents detail mechanistic insights into two commonly discussed routes; namely: surface-assisted conversion of HBr into Br2 and direct bromine transfer from oxybromides into a benzene ring. Utilizing iron surfaces, as structural representative of the metallic content in electronic wastes, results from density functional theory calculations portray accessible reactions into the successive dissociative adsorption of HBr over the Fe(100) surface and the subsequent evolution of gas phase bromine molecules. Activation energies for HBr uptake by the plain iron surface reside in the range of 129-182 kJ/mol. Over an oxygen pre-covered surface, dissociative adsorption of HBr leading to bromine molecules requires significantly lower activation energies (45-78 kJ/mol). Likewise, bromination of a benzene ring into a monobromobenzene molecule over Fe(100)_O*Br* (i.e., an oxybromide) configuration ensues with an opening activation energy of ~ 165 kJ/mol. Adsorption of a phenyl radical over an iron-oxybromide forms a phenolate moiety that subsequently desorbs from the surface into a phenoxy radical. Reaction pathways presented herein shall be useful in the ongoing efforts to comprehend the formation and bromination routes of the notorious bromine-bearing pollutants in real scenarios, such as, these encountered in the open burning and primitive thermal recycling of electronic wastes.

A Mechanistically Inspired Halenium Ion Initiated Spiroketalization: Entry to Mono- and Dibromospiroketals.

Employing halenium affinity (HalA) as a guiding tool, the weak nucleophilic character of alkyl ketones was modulated by the templating effect of a tethered 2-tetrahydropyranyl(THP)-protected alcohol towards realizing a bromenium ion initiated spiroketalization cascade. Addition of ethanol aided an early termination of the cascade by scavenging the THP group after the halofunctionalization stage, furnishing monobromospiroketals. Alternatively, exclusion of ethanol from the reaction mixture biased the transient oxocarbenium towards α-deprotonation that precedes a second bromofunctionalization event thus, furnishing dibrominated spiroketals. The regio- and stereoselectivity exploited in the current methodology provides a novel and rapid access to the dibrominated spiroketal motifs exhibited by several natural products.

Preferential Halogenation of Algal Organic Matter by Iodine over Chlorine and Bromine: Formation of Disinfection Byproducts and Correlation with Toxicity of Disinfected Waters.

The increasing occurrence of harmful algal blooms (HABs) in surface waters may increase the input of algal organic matter (AOM) in drinking water. The formation of halogenated disinfection byproducts (DBPs) during combined chlorination and chloramination of AOM and natural organic matter (NOM) in the presence of bromide and iodide and haloform formation during halogenation of model compounds were studied. Results indicated that haloform/halogen consumption ratios of halogens reacting with amino acids (representing proteins present in AOM) follow the order iodine > bromine > chlorine, with ratios for iodine generally 1-2 orders of magnitude greater than those for chlorine (0.19-2.83 vs 0.01-0.16%). This indicates that iodine is a better halogenating agent than chlorine and bromine. In contrast, chlorine or bromine shows higher ratios for phenols (representing the phenolic structure of humic substances present in NOM). Consistent with these observations, chloramination of AOM extracted from Microcystis aeruginosa in the presence of iodide produced 3 times greater iodinated trihalomethanes than those from Suwannee River NOM isolate. Cytotoxicity and genotoxicity of disinfected algal-impacted waters evaluated by Chinese hamster ovary cell bioassays both follow the order chloramination > prechlorination-chloramination > chlorination. This trend is in contrast to additive toxicity calculations based on the concentrations of measured DBPs since some toxic iodinated DBPs were not identified and quantified, suggesting the necessity of experimentally analyzing the toxicity of disinfected waters. During seasonal HAB events, disinfection practices warrant optimization for iodide-enriched waters to reduce the toxicity of finished waters.

Brominated flame retardant TBPH induced oxidative damage and reduced the expression of memory-related proteins in mice, with no discernable impairment of learning and memory.

Bis(2-ethylhexyl)-2,3,4,5-tetrabromophthalate (TBPH) is one of the new brominated flame retardants with adverse neurobehavioral potential. These flame retardants are often added to household furnishings where children would come into contact with them. This study explores whether oral exposure to TBPH for 28 days would impair neurobehavioral function in mice and the role of curcumin (CUR) in this process. CUR is a natural antioxidant and is thought to be of use in the treatment of neurological toxicity due to its neuroprotective effects. Learning and memory of mice exposed to TBPH was investigated using the Morris water maze. Levels of malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione (GSH) were determined to assess oxidative damage. Western blot was used to detect the expression of glucose-regulated protein 78-kDa (GRP78), PKR-like ER kinase (PERK), and C/EBP homologous protein (CHOP) in the hippocampus. End-point effects were evaluated through observing post-synaptic density protein-95 (PSD-95), brain-derived neurotrophic factor (BDNF), and phosphorylated cAMP response element binding protein (p-CREB). Although TBPH exposure alone does not impair learning and memory, oxidative stress markers and endoplasmic reticulum stress-associated proteins were adversely affected in exposed mice. TBPH could significantly decrease the levels of BDNF, p-CREB, and PSD-95 in the hippocampus, and these TBPH-induced neurotoxic effects were attenuated by CUR. These findings provide further understanding of the neurotoxic effects of TBPH and the protective effect of CUR on TBPH exposure.